SPEEDTOUCH MODEM TELECHARGER PILOTE

The ethernet light should be green steady or flickering , as long as there is at least one ethernet cable connected to a working computer. Navigation menu Personal tools Log in. If it is unlit, there is a power problem or the unit is broken. If the power light goes green, then connect cables. If your unit was able to log in earlier and you have not made any changes, a red light likely means that there is a temporary network problem at the Central Office or NCF making it temporarily impossible to check your login and password.

Uploader: Kemi
Date Added: 16 May 2015
File Size: 67.57 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 7758
Price: Free* [*Free Regsitration Required]

For information about the modem’s speedtouch modem log, consult the modem manual for your modem model. If it flashes indefinitely, there is a problem.

Ethernet traffic is indicated by flickering of the light. You may omdem to power-cycle or speedtouch modem your modem for it to notice that service has been restored. The light is unlit if wireless is disabled turned off.

Otherwise, if the speedtouch modem light remains red or amber then the unit is most likely broken and will have to be replaced. If not, report the problem, although network-wide problems are almost always noticed quickly. If the light remains red or unlitthere is a problem. If you can find speedtojch working internet connection by dial-up, cellphone, at speedtouch modem friend’s home or at an office or libraryyou can check online with NCF to see speedtouch modem anyone else is experiencing problems.

The WLAN light flashes to indicate wireless activity. This page was last edited on 24 Januaryat If you can get moedm elsewhere by dial-up, at a friend’s home or at an office or libraryyou can check the NCF web site to see if others are experiencing problems. Try power cycling the unit, by speedtouch modem the unit from the power and disconnecting it from all cables, waiting more than 5 seconds for capacitors to discharge and then connecting it to power again.

In this case it is best to just wait for the problem to speedtouch modem fixed. During the process of obtaining DSL synchronization, the Broadband light will flash green.

Activity on a line is often indicated by flickering lights, when the line is active. Lights can indicate only moddm small amount moddem information about your modem. If it is unlit, there is a power problem or the unit is broken. Check that the modem speedtouch modem plugged in and switched on. If you are installing your modem for the first time and the DSL light is green but the Internet light is red, likely your unit speedtouch modem been speedtouch modem with a correct login and password.

About DSL modem lights – SpeedTouch modems – Support

speedtouch modem The ethernet light should be green steady or flickeringas long as there is at least one ethernet dpeedtouch connected to a working mofem. Privacy policy About Support Speedtiuch.

The LED there will be green and flicker with activity if ethernet is active on that particular cable. Here’s a summary of how to read the lights of a Thomson spfedtouch other models are similar: Different modem models vary in detail, of course, but typically they have lights speedtouch modem indicate power, the status and activity of the DSL line, and the status and activity of connections to your computer, whether by ethernet speedtouch modem by wireless.

If your unit was able to log in earlier and you have not made any changes, a red light likely means that there is a temporary network problem at the Central Office or NCF making it temporarily impossible to check your login and password. Navigation menu Speedtouch modem tools Log in. If the power light is red or amberthe unit has speedtouch modem a problem with its hardware or software. Sometimes the modem needs to be power-cycled for it to notice a line that has returned to service and to connect to it.

On Linux operating systems speedtouch modem can speedtouch modem telnet by opening a terminal and typing in “telnet Views Read View source View history. If the power light goes green, then connect cables. In any version of Windows you can also run telnet by spewdtouch and using the PuTTY free software application.

adsl/ vdsl/ cable modems

The power light should be steady green. If you are having problems and find any of those back-side speedtouch modem LEDs flashing at a steady rate on-off-on-off To check individual cables, most SpeedTouch modems have green LEDs at the back of the modem where the ethernet cables plug speedtouch modem.

The colour of the light indicates the security mode of the wireless service: